Get a quote in minutes, no commitment click here ›Own factory since 1980 click here ›Order your BTO sample click here ›Find the store nearest you click here ›
BTO Wood Finishing Since 198046 years

The finish of custom millwork. The simplicity of a panel.

Real wood slat panels and ceilings, milled in our own factory in Brazil since 1980. They go up like a panel and look like woodwork made to measure.

Get a quoteOrder samples

  • Seen on HGTV's Property Brothers
  • Discovery Home & Health
  • Breeze at Artefacto Miami
  • NWFA Expo 2025 and 2026
  • 14 countries
  • 46 years in wood

Peel. Place. Press.

Every StickTech panel leaves our factory with BTO's proprietary adhesive film already on the back. Peel off the liner, place the panel and press: no drilling, no spread glue, no dust. Stick Pro glue adds a second, permanent fixing.

The adhesive film comes on the back
1The adhesive film comes on the back
2Peel off the liner
Place it on the wall
3Place it on the wall
Press, and the wall is done
4Press, and the wall is done

See StickTech panels

Curves both ways

StickTech slats flex. Horizontally, they wrap columns, counters and wavy walls. Vertically, they run from the wall into the ceiling in one continuous line, with no visible seam. Snap-fit slat panels follow horizontal curves. Minimum radius: 80 cm.

A wavy stair wall, lit from withinHorizontal
A wavy stair wall, lit from within
From the headboard wall into the ceilingVertical
From the headboard wall into the ceiling
The panel flexes before it goes up
The panel flexes before it goes up
Watch the curve go up

See curved slat panels

Light through the wood

A translucent spacer sits between the slats, with an LED strip behind it. Off, it reads as a plain slatted wall. On, the light draws lines through the wood. For Slim, Concept, Essence and Stilo slat panels, and Lisse with groove or joint.

LED offLED on
The same wall, LED off and on
Backlit slats on a staircase wall
Video: Larissa Reis Arquitetura
@larissareisarquitetura

See Translucent Wood

Solid teak, cumaru and tauari

Legal timber with a Brazilian forest origin document (DOF), selected slat by slat. Teak and Cumaru (Brazilian Teak) are naturally durable, the woods we recommend for facades and areas open to sun and rain. Tauari (Brazilian Oak) is for interiors and covered areas. We plant what we use: 239 acres of our own reforestation.

Teak slats on a house facade
Teak slats on a house facade
Teak slat ceiling with LED
Teak slat ceiling with LED
Cumaru (Brazilian Teak) slats
Cumaru (Brazilian Teak) slats

What makes a panel look custom

Straight slats, exact profiles, tight joints and trims that match. Our slats are milled on Weinig molders, finished on our own coating line and checked before they are packed. Colors follow the leading MDF board brands, the MDF is FSC-certified, and every line comes with trims and spacers, so the edges look finished, not cut. That is the difference between a panel and woodwork.

Slats milled on a Weinig molder in the BTO factory

Inside the BTO factory

Where BTO already is

Stores, TV makeovers, restaurants and showrooms in the Americas.

Artefacto, Miami: Breeze divider in nude at the Artefacto store
Artefacto, MiamiBreeze divider in nude at the Artefacto store
Manhattan Flooring, New York: BTO distributor showroom
Manhattan Flooring, New YorkBTO distributor showroom
Discovery Home & Health: Breeze and BTO panels in a TV makeover
Discovery Home & HealthBreeze and BTO panels in a TV makeover
Restaurant in Lima, Peru: Breeze on the ceiling
Restaurant in Lima, PeruBreeze on the ceiling
Discovery Home & Health: Breeze as a headboard
Discovery Home & HealthBreeze as a headboard

On HGTV's Property Brothers, a BTO panel with a gold spacer went into a project for actress Rosario Dawson.

Hear it from people who use it

Actresses, architects and creators who put BTO in their own homes and projects.

Monique AlfradiqueActress
Carol Nakamura and friendsActresses, architects and creators
Hudson Castro ArquiteturaArchitect, Corais peel and stick

Bring BTO into your next project

We deliver to your job site; your installer or contractor installs. Every order comes with installation manuals in English and technical support from the factory. Architects and designers get samples and technical sheets for specification.

Get a quoteOrder samplesFor architects

Questions about BTO panels

Are BTO panels real wood?

The solid wood lines are solid Teak, Cumaru (Brazilian Teak) or Tauari (Brazilian Oak). The MDF lines use FSC-certified MDF with wood-look or solid-color finishes that match the leading MDF board brands.

How does the StickTech adhesive film work?

StickTech panels come with BTO's proprietary adhesive film on the back. You peel off the liner, place the panel and press. Stick Pro glue adds a second fixing. No drilling and no spread glue.

Can wood slat panels curve?

Yes. StickTech panels curve horizontally (columns, counters, wavy walls) and vertically (from wall to ceiling). Snap-fit slat panels follow horizontal curves. The minimum radius is 80 cm.

Can the slats be backlit?

Yes, with Translucent Wood: a translucent spacer between the slats and an LED strip behind it. Available for Slim, Concept, Essence and Stilo, and for Lisse with groove or joint.

Which wood can go on a facade?

Only Teak and Cumaru (Brazilian Teak), which are naturally durable outdoors. MDF and Tauari (Brazilian Oak) are for interiors and covered areas.

Does BTO install the panels?

No. We deliver to the job site with installation manuals in English and technical support from the factory; your installer or contractor installs.