Get a quote in minutes, no commitment click here ›Own factory since 1980 click here ›Order your BTO sample click here ›Find the store nearest you click here ›
BTO Wood Finishing Since 198046 years

BTO Blog

Flexible wood slat panels: how they curve, where to use them and the minimum radius

BTO's flexible wood slat panel bends by hand and curves horizontally and vertically, with a minimum radius of 80 cm. Corais Collection and StickTech with adhesive film: where to use, how to install and what changes the quote.

Published 15/11/2026 by the BTO team

Quick answers

What is a flexible wood slat panel?

It is a slat panel that bends and follows curved surfaces. At BTO, these are the StickTech panels and the Corais Collection, which bend by hand and come with an adhesive film on the back.

Can a slatted panel curve?

Yes. StickTech and the Corais Collection curve horizontally and vertically. Snap-fit slat panels curve only horizontally.

What is the minimum curve radius?

80 cm. For tighter curves, send the measurements and the factory confirms which line works.

Do I need construction work to install it?

No. Just peel off the liner of the adhesive film, place the panel on the curve and press. Stick Pro adhesive reinforces the bond.

Where to use flexible slat panels?

On round and square columns, counters, arches, wavy walls, headboards and walls that run up into the ceiling.

Can they go outdoors?

StickTech is for interiors and covered outdoor areas. For facades and uncovered areas, only solid Teak or Cumaru.

Bends by hand and curves both ways

The StickTech panel is flexible: it bends by hand and rolls up without breaking. That is why it goes horizontally, wrapping columns, counters and wavy walls, and vertically, running up the wall and curving into the ceiling with no visible seam.

Bends by handThe panel is flexible and rolls up without breaking.
Vertical curveThe slats run up behind the headboard and become the ceiling.

Which lines curve

LineHorizontal curveVertical curveHow it is fixed
StickTech (straight slats)YesYesAdhesive film on the back and Stick Pro adhesive
Corais Collection (rounded slats)YesYesAdhesive film on the back, StickTech system
Snap-fit slat panelsYesNoSnap-fit, with double-sided tape and adhesive

The minimum curve radius is 80 cm for all of them. For tighter curves or special projects, send the measurements through the calculator or WhatsApp and the factory confirms which line works.

Where to use flexible wood slat panels

Round column clad in wood slat panels in a restaurant
ColumnsRound or square, fully wrapped.
Reception with a curved counter and wall covered in wood slat panels
CountersCurved reception desks, counters and islands.
Arched portal covered with StickTech wood slat panels
Arches and portalsThe slats follow the opening.
Staircase with a wavy wood slat wall and LED
Wavy wallsWith or without light inside.

See more curved projects

Corais Collection or StickTech: which to choose

Both curve in both directions and stick with the same adhesive film. The difference is the shape of the slat.

TV wall with the Corais Collection, Noronha model
Corais CollectionRounded slats that add movement and softness. Noronha, Oceano, Eros, Gaia and Mistral models. See the Corais Collection
Hand peeling the liner off the StickTech adhesive film
StickTechStraight slats with grooves, such as Essence and Concept, with the proprietary adhesive film on the back. See StickTech

How to install flexible panels

  1. Peel off the liner that protects the adhesive film on the back of the panel.
  2. Apply to the surface: smooth wall, MDF or the curve itself.
  3. Press and align with the previous panel. Stick Pro adhesive reinforces the bond.
  4. Done: no nails, no messy glue and no construction work.

The full step by step is in the StickTech manual and in how to install wood slat panels.

On site: peel and stick

People who installed it show how it works: the panel comes ready, with the adhesive film on the back.

Video: Eduardo Wizard, Casa do Edu @casadoedu

Video: Hudson Castro Arquitetura @hudsoncastroarquitetura

What changes the quote

The site shows no prices because every curve is a project. The quote depends on:

The calculator builds your project and the quote comes with shipping and lead time.

Calculate my projectRequest a sample

Frequently asked questions

Can the flexible slat panel go on the ceiling?

Yes. Vertically, StickTech runs up the wall and curves into the ceiling as one surface, with no visible seam.

Can I cover a round column with slats?

Yes. Round and square columns are one of the most requested uses of StickTech and the Corais Collection, in homes, stores and restaurants.

What is the lead time for flexible panels?

StickTech takes 15 to 20 business days of production, plus shipping.

Do flexible panels have a warranty?

Yes. BTO panels have a 5-year warranty against manufacturing defects.

Summary

BTO's flexible wood slat panels are StickTech and the Corais Collection: they bend by hand, curve horizontally and vertically with a minimum radius of 80 cm, and stick with the adhesive film on the back, no construction work. They suit columns, counters, arches, wavy walls and walls that run up into the ceiling.

Keep reading

See all articles

Need help with your project?

Send the measurements and get a quote with shipping and lead time.

Calculate my projectChat on WhatsApp