Illustrative image
Tauari (Brazilian Oak)
Couratari spp. · family Lecythidaceae
Natural look, visual lightness and a refined finish.
Light, even and calm. Tauari brings lightness to a space and pairs well with light palettes, clean lines and natural light. It takes varnish very well and has a smooth, refined feel.
- Density610 kg/m³
- Janka hardness5,315 N
- Where it goesInterior and covered outdoor
Tauari solid wood slat wall panels and ceilings
Illustrative image
Illustrative image
Illustrative imageAlso available as
Reference technical data
- Density
- 610 kg/m³ at 12% moisture, about 38 lb/ft³
- Janka hardness
- 5,315 N parallel, at 12%, about 1,195 lbf
- Bending strength
- 88.8 MPa modulus of rupture at 12%, about 12,900 psi
- Radial and tangential shrinkage
- 4.2% and 6.6% COPANT standard, volumetric 10.9%
- Natural durability
- Low for this reason, interior and covered outdoor areas only
Mass per volume of the wood at a given moisture. Denser wood tends to be stronger.
Force needed to embed a steel ball into the wood. The higher, the better it resists dents.
Load the piece withstands before breaking when bent (modulus of rupture).
How much the wood shrinks as it dries. Lower shrinkage means more stability.
Natural resistance of the heartwood to fungi and insects, without treatment.
Source: IPT, Tauari data sheet, Couratari oblongifolia. The name Tauari covers several species of the genus Couratari. Values refer to one reference species and vary from one species to another.
Where to use, care and minimum order
Where to use
- Interior
- Covered outdoor area
- Facade and exposed area: not recommended
Not recommended for
- Facades and uncovered outdoor areas
- Inside showers, saunas and pool edges
- Installation without battens or on damp walls
Minimum order: 100 m² (about 1,076 sq ft), combining the same wood in one order.
Care
- Interior and covered outdoor areas only; never on facades or exposed areas
- Varnish on all faces, before installation
- 1 cm (3/8 in) expansion gap at the sides
Color and grain
Heartwood from yellowish white to light beige, with little difference from the sapwood. Straight grain, medium texture and a uniform look, without strong contrasts.
Profiles and sizes

2x1
- Visible face
- 2 cm
- Reveal
- 1 cm
- Piece width
- 3 cm
- Thickness
- 10 / 15 mm
- Length
- 2.00 m
- Per box
- 0.6 m²

4x1
- Visible face
- 4 cm
- Reveal
- 1 cm
- Piece width
- 5 cm
- Thickness
- 10 / 15 mm
- Length
- 2.00 m
- Per box
- 0.8 m²

8x1
- Visible face
- 8 cm
- Reveal
- 1 cm
- Piece width
- 9 cm
- Thickness
- 10 / 15 mm
- Length
- 2.00 m
- Per box
- 0.9 m²
Installation tips
Acclimatization
Leave the pieces on site for at least 72 hours, out of the boxes, before installing.
Battens
Treated wood battens every 30 to 45 cm (12 to 18 in), PU adhesive and one pin per batten.
Gap
Leave 1 cm (3/8 in) at the sides: solid wood expands and contracts with the climate.
Finish
Varnish on all faces and cut ends; stainless or galvanized pins and screws.
Ready-to-use specification text
Copy and paste into your project specification. Adjust the model and thickness.
Solid Tauari (Couratari spp.) wood slat wall panel (or ceiling), manufactured by BTO, model 2x1, 4x1 or 8x1 (2, 4 or 8 cm visible face with a 1 cm reveal), 10 or 15 mm thick, 2.00 m long pieces, legal timber with Brazilian DOF, kiln dried and machined on a Weinig moulder, with or without factory varnish. Installed on treated wood battens every 30 to 45 cm, with PU adhesive and one pin per batten, 1 cm gap at the sides, per the manufacturer's installation manual.
- Visual lightnessIts light, even tone opens up the space and enhances natural light.
- Refined finishStraight grain and regular texture: it takes varnish evenly.
- Interior and covered outdoor areasLiving rooms, bedrooms, ceilings, porches and covered outdoor kitchens.
Other woods
