Teak
Tectona grandis L.f. · family Lamiaceae
Natural elegance, stability and weather resistance.
One of the most valued tropical woods in the world, a reference for centuries in boatbuilding, yacht interiors and outdoor furniture. Teak combines golden beauty, stability and weather resistance, and it is the most recognized wood in the international market.
- Density660 kg/m³
- Janka hardness5,600 N
- Where it goesUp to facades
Teak solid wood slat wall panels and ceilings



Also available as
Reference technical data
- Density
- 660 kg/m³ at 15% moisture, about 41 lb/ft³
- Janka hardness
- 5,600 N parallel, green wood, about 1,260 lbf
- Bending strength
- 92 MPa modulus of rupture at 15%, about 13,300 psi
- Radial and tangential shrinkage
- 2.1% and 4.6% volumetric 6.7%
- Natural durability
- High resistant to fungi, insects and weathering
Mass per volume of the wood at a given moisture. Denser wood tends to be stronger.
Force needed to embed a steel ball into the wood. The higher, the better it resists dents.
Load the piece withstands before breaking when bent (modulus of rupture).
How much the wood shrinks as it dries. Lower shrinkage means more stability.
Natural resistance of the heartwood to fungi and insects, without treatment.
Source: IPT, Teak data sheet, wood of unspecified origin. Teak from young plantations may show slightly lower density and hardness (Forests, 2024, plantations in Mato Grosso). Values from technical literature, not tests of the BTO product.
Where to use, care and minimum order
Where to use
- Interior
- Covered outdoor area
- Facade and exposed area
Not recommended for
- Direct contact with soil or standing water
- Installation without battens or on damp walls
- Outdoor use without varnish, if you want to keep the golden tone
No minimum order.
Care
- Exterior-grade varnish on all faces, before installation
- Varnish maintenance according to sun and rain exposure
- 1 cm (3/8 in) expansion gap at the sides
Color and grain
Heartwood from golden to golden brown, with striking grain and a slightly oily touch from the wood's own natural oils. Left unfinished in the sun, it weathers to a silver gray over time; with varnish and maintenance, it keeps its golden tone.
Profiles and sizes

2x1
- Visible face
- 2 cm
- Reveal
- 1 cm
- Piece width
- 3 cm
- Thickness
- 10 / 15 mm
- Length
- 2.00 m
- Per box
- 0.6 m²

4x1
- Visible face
- 4 cm
- Reveal
- 1 cm
- Piece width
- 5 cm
- Thickness
- 10 / 15 mm
- Length
- 2.00 m
- Per box
- 0.8 m²

8x1
- Visible face
- 8 cm
- Reveal
- 1 cm
- Piece width
- 9 cm
- Thickness
- 10 / 15 mm
- Length
- 2.00 m
- Per box
- 0.9 m²
Installation tips
Acclimatization
Leave the pieces on site for at least 72 hours, out of the boxes, before installing.
Battens
Treated wood battens every 30 to 45 cm (12 to 18 in), PU adhesive and one pin per batten.
Gap
Leave 1 cm (3/8 in) at the sides: solid wood expands and contracts with the climate.
Finish
Varnish on all faces and cut ends; stainless or galvanized pins and screws.
Ready-to-use specification text
Copy and paste into your project specification. Adjust the model and thickness.
Solid Teak (Tectona grandis) wood slat wall panel (or ceiling), manufactured by BTO, model 2x1, 4x1 or 8x1 (2, 4 or 8 cm visible face with a 1 cm reveal), 10 or 15 mm thick, 2.00 m long pieces, legal timber with Brazilian DOF, kiln dried and machined on a Weinig moulder, with or without factory varnish. Installed on treated wood battens every 30 to 45 cm, with PU adhesive and one pin per batten, 1 cm gap at the sides, per the manufacturer's installation manual.
- Highly stableAmong the lowest shrinkage rates of commercial woods: it moves very little with changes in humidity.
- Recognized worldwideAn international reference in yachts, hospitality and garden furniture.
- No minimum orderFrom a single feature wall to entire projects.
Teak is also part of the Teak Wood Line, with the exclusively designed Tekawood models.
Other woods
Illustrative image
