Get a quote in minutes, no commitment click here ›Own factory since 1980 click here ›Order your BTO sample click here ›Find the store nearest you click here ›
BTO Wood Finishing Since 198046 years
Cumaru ceiling in a covered outdoor area
Back to solid wood

Cumaru (Brazilian Teak)

Dipteryx odorata (Aubl.) Willd. · family Fabaceae

Strength, presence and the character of Brazilian hardwood.

One of the densest and hardest woods in Brazil. Cumaru has presence: deep brown tones, a bold grain and a strength you can feel in your hand. It is the choice for facades, exterior ceilings and high-traffic areas.

  • Density1,090 kg/m³
  • Janka hardness9,787 N
  • Where it goesUp to facades

Cumaru solid wood slat wall panels and ceilings

Cumaru: Ceiling in a covered outdoor area
Cumaru (Brazilian Teak) · Ceiling in a covered outdoor area
Cumaru: Facade with a vertical slatted panelIllustrative image
Cumaru (Brazilian Teak) · Facade with a vertical slatted panel
Cumaru: Slatted ceiling and wall in an outdoor kitchenIllustrative image
Cumaru (Brazilian Teak) · Slatted ceiling and wall in an outdoor kitchen
Reference technical data
Density
1,090 kg/m³
at 15% moisture, about 68 lb/ft³
Janka hardness
9,787 N
green wood, about 2,200 lbf; dried to 12%, 13,100 to 15,700 N, about 2,950 to 3,530 lbf (LPF)
Bending strength
178.3 MPa
modulus of rupture at 15%, about 25,900 psi
Radial and tangential shrinkage
5.3% and 8.2%
volumetric 13.6%
Natural durability
High
heartwood resistant to decay fungi and termites

Source: IPT, Cumaru data sheet and LPF, Brazilian Forest Service. Data from technical literature for the species, not tests of the BTO product. Values vary with origin, lot, moisture content and grading.

Where to use, care and minimum order

Where to use

  • Interior
  • Covered outdoor area
  • Facade and exposed area

Not recommended for

  • Direct contact with soil or standing water
  • Installation without battens or on damp walls
  • Outdoor use without exterior varnish

Minimum order: 100 m² (about 1,076 sq ft), combining the same wood in one order.

Care

  • Exterior-grade varnish on all faces, before installation
  • Very hard wood: pre-drill for screws
  • Stainless steel or galvanized pins and screws
  • 1 cm (3/8 in) expansion gap at the sides

Color and grain

Heartwood from yellowish brown to reddish brown, sometimes with darker streaks. Irregular to interlocked grain, medium texture, natural luster. With light exposure, the tone deepens and becomes more even.

Profiles and sizes
Cumaru 2x1

2x1

Visible face
2 cm
Reveal
1 cm
Piece width
3 cm
Thickness
10 / 15 mm
Length
2.00 m
Per box
0.6 m²
Cumaru 4x1

4x1

Visible face
4 cm
Reveal
1 cm
Piece width
5 cm
Thickness
10 / 15 mm
Length
2.00 m
Per box
0.8 m²
Cumaru 8x1

8x1

Visible face
8 cm
Reveal
1 cm
Piece width
9 cm
Thickness
10 / 15 mm
Length
2.00 m
Per box
0.9 m²
Installation tips

Acclimatization

Leave the pieces on site for at least 72 hours, out of the boxes, before installing.

Battens

Treated wood battens every 30 to 45 cm (12 to 18 in), PU adhesive and one pin per batten.

Gap

Leave 1 cm (3/8 in) at the sides: solid wood expands and contracts with the climate.

Finish

Varnish on all faces and cut ends; stainless or galvanized pins and screws.

Ready-to-use specification text

Copy and paste into your project specification. Adjust the model and thickness.

Solid Cumaru (Dipteryx odorata) wood slat wall panel (or ceiling), manufactured by BTO, model 2x1, 4x1 or 8x1 (2, 4 or 8 cm visible face with a 1 cm reveal), 10 or 15 mm thick, 2.00 m long pieces, legal timber with Brazilian DOF, kiln dried and machined on a Weinig moulder, with or without factory varnish. Installed on treated wood battens every 30 to 45 cm, with PU adhesive and one pin per batten, 1 cm gap at the sides, per the manufacturer's installation manual.

Spec sheets and documents
  • Built for heavy useVery high density and hardness: it resists impact and wear in high-traffic areas.
  • Made to last outdoorsVery high natural durability, a benchmark among Brazilian hardwoods.
  • Demands a careful processIts higher shrinkage is the reason for kiln drying, acclimation and expansion gaps.

Other woods

Teak bathroom wall, Oceano model

Teak

Tectona grandis

Natural elegance, stability and weather resistance.

Up to facadesGolden660 kg/m³
Tauari ceiling on a covered porchIllustrative image

Tauari

Couratari spp.

Natural look, visual lightness and a refined finish.

Interior and covered outdoorLight610 kg/m³

Back to solid wood

Ready to bring solid wood to your project?

On the BTO Blog

Cumaru wood ceiling: sizes, where to use, installation and care

Solid Cumaru ceiling, kiln-dried and with the Brazilian forest origin document (DOF): slat sizes, where it can go (indoors, porches, eaves and uncovered areas), finish, how it is installed on battens and how to care for it.

Read the article