Get a quote in minutes, no commitment click here ›Own factory since 1980 click here ›Order your BTO sample click here ›Find the store nearest you click here ›
BTO Wood Finishing Since 198046 years

BTO Blog

Wood ceiling: what changes the price per m² and which wood to choose

What drives the price of a wood ceiling, which wood to use where, wood or PVC, measurements and maintenance.

Published 01/11/2026 by the BTO team

What changes the price per m² of a wood ceiling

That is why there is no single price per square meter: the calculator on the site builds your ceiling and the quote comes with shipping and lead time.

Calculate my ceiling

Porch with Teak slatted ceiling
Porch with Teak slatted ceiling
Kitchen with slatted ceiling
Kitchen with slatted ceiling
Porch with slatted ceiling
Porch with slatted ceiling
Lobby with slatted ceiling
Lobby with slatted ceiling

Which wood to choose for the ceiling

Cumaru (Brazilian Teak)

Brown, dense and very durable. For indoor, outdoor and uncovered areas. Cumaru ceiling.

Tauari (Brazilian Oak)

Light and even. For indoor and covered outdoor areas. Tauari ceiling.

Teak

Golden and weather resistant. For indoor, outdoor and uncovered areas. Teak wood.

MDF tongue-and-groove

Soft, Design and Prime models, in many colors, with a shorter production time. For indoor and covered outdoor areas. Wood and tongue-and-groove ceilings.

Wood or PVC ceiling

PVC is plastic and usually costs less per square meter. A wood ceiling brings the grain and variation of real wood, helps with thermal and acoustic comfort and lasts for decades when the varnish is kept up. BTO works with solid wood and MDF and does not make PVC.

How the wood ceiling is installed

The solid wood ceiling goes on wooden battens, without drywall, as shown in the line's manual. The MDF tongue-and-groove ceiling is modular, with ceiling trim for the finish. BTO provides technical support and manuals. See the step by step in Manuals and warranty.

Care and maintenance

Preventive maintenance follows the cycle of the chosen varnish. Over time the wood oxidizes; with sanding and new varnish, the surface looks new again. Outdoors, always with varnish made for exterior use.

Frequently asked questions

How much does a wood ceiling cost per m²?

It depends on the wood, the slat width, the finish, the area, the installation and shipping. The calculator on the site does the math for your ceiling and the quote comes with shipping and lead time.

What is the ideal wood for a ceiling?

Indoors, Cumaru, Tauari or Teak, or MDF tongue-and-groove. For uncovered outdoor areas, only Teak or Cumaru.

What are the wood ceiling measurements?

In BTO solid wood, 2x1, 4x1 and 8x1 cm slats, 10 or 15 mm thick. MDF tongue-and-groove measurements are on each model's page.

Can a wood ceiling go outdoors?

In covered outdoor areas, yes. In uncovered areas, only the Teak or Cumaru ceiling, always with varnish made for exterior use.

Summary

There is no single price per m² for a wood ceiling: it changes with the wood, the slat width, the finish, the area, the installation and shipping. Indoors you can use Cumaru, Tauari, Teak or MDF tongue-and-groove; in uncovered areas, only Teak or Cumaru. The calculator on the site builds your ceiling and the quote comes with shipping and lead time.

Keep reading

See all articles

Need help with your project?

Send the measurements and get a quote with shipping and lead time.

Calculate my projectChat on WhatsApp

On the BTO Blog

Cumaru wood ceiling: sizes, where to use, installation and care

Solid Cumaru ceiling, kiln-dried and with the Brazilian forest origin document (DOF): slat sizes, where it can go (indoors, porches, eaves and uncovered areas), finish, how it is installed on battens and how to care for it.

Read the article